Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Liner & Rebuild for Orland Park Homeowners
A Orland Park Chimney Liner & Rebuild typically costs $1,800 for a stainless steel liner replacement up to $8,500 or more for a full chimney rebuild, with most liner jobs completed in one day and rebuilds taking 2-4 days. Emberly Chimney Cleaners Orland Park has completed more than 38,000 chimney inspections and cleanings since 2009, every one with a written price before work started and a documented photo record when finished. If your flue liner is cracked, your chimney is pulling away from the house, or you’re seeing mortar crumble onto the roof after Orland Park’s freeze-thaw cycles, we send a background-checked, uniformed technician with a camera, a written scope, and a price you can hold in your hand before anyone touches a tool. Call (708) 294-2571 and a live person answers, 24 hours a day.
What Our Chimney Liner & Rebuild Service Includes
Stainless Steel Liner
A stainless steel liner is a corrugated or smooth metal tube dropped down your flue to contain combustion gases and protect the masonry from heat and acid. In Orland Park, we install these most often in 1980s and 1990s homes where the original clay tile liner has cracked after decades of thermal cycling, or where a new high-efficiency insert needs a properly sized flue. Our crews source stainless steel from Olympia Chimney and DuraFlex through Haven’s buying network, measure the flue with a video scan first, and stamp the installation with our 365-Day Done Right Promise.
Flexible Liner
A flexible liner is a continuous, bendable stainless steel tube that navigates offsets and bends in older chimneys where a rigid liner won’t pass. We’ve installed hundreds of these in Orland Park’s ranch and split-level homes, where the chimney often shifts direction in the attic to meet the roof line. The flexible design reduces joints where creosote can collect, and we always run a camera behind the installation to verify full circumferential contact with the flue walls, documented under Haven Standard Clause 4.
Liner Replacement
Liner replacement means removing a failed clay, metal, or cast-in-place liner and installing a new one rated for your appliance type and fuel. We recommend this when a Level 2 inspection shows cracked tiles, gaps between tile joints, or a liner that is no longer listed for the appliance now connected to it, which is common in Orland Park homes where homeowners switched from wood to gas without updating the flue. Every replacement starts with a written scope, a written price, and a written warranty, delivered before work begins, Haven Standard Clause 1.
Partial Rebuild
A partial rebuild addresses the section of chimney that has failed, typically from the roofline up, including the crown, cap, and upper courses of brick. In Orland Park, we see this need most often on chimneys with concrete crowns that cracked and let water saturate the top courses, or where spalling brick faces peel off after water freezes in the pores. We match existing brick color and profile where possible, install a proper concrete or cast-in-place crown with drip edges, and document the completed work with photos you keep.
Full Chimney Rebuild
A full chimney rebuild is the complete disassembly and reconstruction of the chimney structure from the roofline or foundation up, reserved for cases where the masonry system has failed comprehensively. This is more common in Orland Park’s older homes near Silo Ridge and the original downtown grid, where chimneys may lack proper footings or have suffered decades of water infiltration without maintenance. We rebuild with new brick, block, or stone, install a code-compliant flue liner sized to the appliance, and provide the full photo record and written warranty that Haven Standard Clause 4 requires.
Liner Repair
Liner repair is the targeted restoration of a sound but damaged liner, often using a cast-in-place refractory cement system like HeatShield to seal cracks and gaps without full replacement. We pursue this option in Orland Park when the clay tile liner is largely intact but has minor cracking or missing mortar joints, and when the homeowner wants to preserve the original flue dimensions. The process involves a custom foam applicator and a ceramic refractory mixture that cures to a smooth, insulated surface, backed by our 365-Day Done Right Promise if any defect appears.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Liner & Rebuild
We’ve installed and repaired chimney liners and components from Gelco, Olympia Chimney, and Famco across thousands of jobs in Orland Park and surrounding communities. With Gelco, we handle their stainless steel and aluminum liner systems for both wood-burning and gas applications, including their proprietary connector kits and termination caps that we stock in our Haven network inventory. Olympia Chimney’s smooth-wall stainless steel liners are our standard for Orland Park homeowners who want maximum draft efficiency and easier future cleaning, and we’ve completed enough of these installations that our crews can size and specify without delay.
Famco’s caps, dampers, and termination hardware round out our rebuild work, particularly their locking-top dampers that we install during partial and full rebuilds to stop conditioned air loss when the fireplace isn’t in use. Whether your existing system is Gelco, Olympia Chimney, Famco, or any other make, we can inspect it, source compatible materials through our buying network, and quote the repair or replacement in writing before any work begins. Bring us a competitor’s written estimate and we’ll provide a Free Second Opinion at no charge.
Before
AfterSigns You Need Chimney Liner & Rebuild Right Now
- White staining or efflorescence on exterior brick means water is moving through the masonry and depositing salts as it evaporates. In Orland Park, this accelerates after winter freeze-thaw cycles and indicates the chimney’s waterproofing system, including the crown and cap, has failed and is letting moisture reach the liner and interior structure.
- Flakes of tile or mortar in the firebox or cleanout are pieces of your clay liner that have detached after thermal shock or age deterioration. Once the liner surface is compromised, combustion gases can leak into chimney walls or living spaces, and the chimney is no longer performing its safety function.
- Smoke or odors entering the home during use suggests a breach in the flue liner, improper sizing, or blockages that are forcing exhaust into the house rather than up the chimney. This is a carbon monoxide risk and warrants immediate inspection with a camera scan to locate the exact failure point.
- Visible cracks in the chimney crown or missing mortar joints allow water directly into the chimney core, where it degrades both masonry and metal components. Orland Park’s position in a snow-belt climate means these defects worsen every winter, turning a crown repair into a partial rebuild if deferred too long.
- The chimney is leaning, separating from the house, or showing stair-step cracks signals foundation or structural failure that demands prompt evaluation. A tilting chimney can collapse in high winds or under snow load, and the separation gap often becomes a path for water, pests, and cold air into the structure.
Our Chimney Liner & Rebuild Process - Step by Step
- 1
Schedule and confirm. Call (708) 294-2571 and a live person answers, any time of day. We book your appointment, assign a named technician, and send a text when they’re en route, Haven Standard ‘Arrive on schedule’ and ‘Verified crews.’ You’ll know who’s coming and when.
- 2
NFPA 211 Level 2 inspection with camera scan. Our technician arrives in uniform with license information displayed, sets up containment to protect your floors and furnishings, and runs a high-resolution camera the full length of the flue. We document liner condition, creosote class, crown integrity, and any structural defects with time-stamped footage and still images.
- 3
Written diagnosis, scope, and price. Before any work is proposed, you receive a written document naming what we found, what we recommend, what it costs, and what warranty applies. This is Haven Standard Clause 1: ‘Have it in writing.’ Nothing is suggested without camera evidence you can see for yourself, and we plainly state when work can safely wait.
- 4
Authorized work with documented execution. Once you approve the scope, our crew completes the liner installation or rebuild using materials sourced through Haven’s buying network. We photograph key stages, test draft and clearances, and run a final camera scan to verify the completed work meets code and manufacturer specifications.
- 5
Final documentation and warranty registration. You receive the complete photo record, written warranty, and maintenance recommendations before we leave. Haven Standard Clause 4 requires this documentation on every job, and our 365-Day Done Right Promise means if anything isn’t right, we make it right, period.
How Much Does Chimney Liner & Rebuild Cost in Orland Park?
A typical stainless steel liner replacement in Orland Park runs $1,800-$3,400 for a straightforward single-flue installation in a standard-height ranch or two-story home, which factors into how much Chimney Liner & Rebuild costs overall. Flexible liner installations in chimneys with offsets or bends range $2,200-$3,800 because of the additional labor to navigate the flue path and verify complete insertion. Liner repair with a cast-in-place refractory system like HeatShield generally falls between $1,200-$2,500 depending on the linear feet of flue and the severity of cracking. Partial rebuilds from the roofline up, including new crown and cap, typically cost $3,500-$6,500 in Orland Park’s market. Full chimney rebuilds, which we see most often in the older neighborhoods near Orland Square and the original village grid, range from $6,500-$8,500 and can exceed that for multi-flue structures or specialty masonry matching.
Several factors move these prices. Height and accessibility matter: a chimney on a steep roof in Orland Park’s Silo Ridge area requires more setup and safety rigging than one on a walkable pitch. The number of appliances served affects liner sizing and material cost. Hidden damage found during tear-out, such as deteriorated smoke chamber walls or a rotted cricket, adds scope we couldn’t see from the outside. And the specific materials selected, whether a standard Olympia Chimney flexible liner or a premium smooth-wall system, shift the final number.
To avoid overpaying, get the inspection and price in writing before work starts, which is exactly what Haven Standard Clause 1 requires. Be cautious of any company that won’t commit to a fixed scope and price, or that finds “emergency” damage they can’t show you on camera. Our estimates are free, our camera evidence is yours to keep, and we offer a Free Second Opinion on any competitor’s written quote so you can compare scope against scope, not guess against guess.
Chimney Liner & Rebuild Near Orland Park - Our Service Area
Emberly Chimney Cleaners Orland Park serves homeowners throughout the southwest suburbs, including Chimney Liner & Rebuild in Tinley Park, Chimney Liner & Rebuild in Homer Glen, Oak Lawn, Hinsdale, Downers Grove, Lansing, Joliet, Westchester, Naperville, Chicago, and Oak Park. Most Orland Park appointments are scheduled within a few business days, and our technicians carry common liner diameters and rebuild materials on their trucks to minimize return trips. Whether you’re in a 1960s tri-level near 159th Street or a new construction home south of Wolf Road, we apply the same inspection standard and documentation practice.
Serving Orland Park, IL - Our Local Coverage Area
We’re based in the Orland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Liner & Rebuild in Orland Park
Chimney liner and rebuild service restores or replaces the internal flue liner that contains combustion gases, and reconstructs masonry that has failed due to water, age, or structural stress. The liner protects your home from heat transfer and carbon monoxide intrusion, while the masonry structure supports the liner and sheds water away from the building envelope. Emberly Chimney Cleaners Orland Park performs both services starting with an NFPA 211 Level 2 camera inspection, written scope, and written price before any work begins. Call (708) 294-2571 for a free estimate.
Most stainless steel or flexible liner replacements are completed in one day, with the crew arriving in the morning and finishing by late afternoon. Partial rebuilds typically take 1-2 days, and full chimney rebuilds require 2-4 days depending on weather, masonry curing requirements, and the complexity of the structure. We provide a specific timeline in your written scope before work starts, and we don’t leave your home with an open flue overnight. Call (708) 294-2571 to schedule and get your exact timeline.
Chimney liner replacement in Orland Park typically costs $1,800-$3,400, liner repair runs $1,200-$2,500, partial rebuilds range $3,500-$6,500, and full rebuilds start around $6,500-$8,500 depending on height, materials, and hidden conditions discovered during work. Every estimate we provide is free, fixed in writing, and based on actual camera findings rather than guesswork. Call (708) 294-2571 for an exact quote on your specific chimney.
Yes, we install, repair, and source replacement parts for Gelco, Olympia Chimney, and Famco liner systems and components, and we stock common sizes and fittings through Haven’s buying network. Our crews are trained on each manufacturer’s connection methods, clearances, and warranty requirements. If your existing system is from another manufacturer, we can still inspect it and source compatible materials. Call (708) 294-2571 to discuss your specific equipment.
Our live phone support runs 24 hours a day, 7 days a week, and we prioritize calls where a chimney poses immediate safety concerns, such as a leaning stack, visible flame or spark egress, or carbon monoxide alarm activation tied to fireplace use. We do not promise same-day dispatch for all requests, but we will assess urgency over the phone and schedule accordingly, with documentation of the condition and temporary safety measures if needed. Call (708) 294-2571 any time to report an emergency condition.
Every liner and rebuild job is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right, with no argument and no additional charge. Manufacturer warranties on materials like Olympia Chimney stainless steel or HeatShield refractory systems apply in addition to our workmanship guarantee. Haven Standard Clause 4 requires that your written warranty and photo documentation are delivered before we leave the job site. Call (708) 294-2571 to discuss warranty specifics for your project.
Clear a path to the fireplace or appliance, remove fragile items from the mantel and hearth area, and ensure roof access is available if exterior work is planned. For rebuilds, move vehicles from the driveway to allow material delivery and debris removal. Our technicians bring their own containment, drop cloths, and cleanup equipment, and we protect flooring and furnishings as standard practice. You’ll receive a preparation checklist by text or email when your appointment is confirmed. Call (708) 294-2571 to book and we’ll walk you through anything specific to your job.
Schedule Your Chimney Liner & Rebuild Service in Orland Park Today
Call (708) 294-2571 now and a live person will answer, 24 hours a day. We’ll book your free estimate, send a background-checked technician with a camera and a license number you can verify, and deliver a written price, written scope, and written warranty before anyone starts work. That’s Haven Standard Clause 1, and it’s how we’ve served more than 38,000 chimneys since 2009. No obligation, no pressure, no surprises.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Orland Park, serving Orland Park since 2009.