Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cap & Crown in Orland Park: What to Know First
We provide independent Olympia Chimney chimney cap & crown service in Orland Park, with most jobs quoted and scheduled within 24 hours of your call. A standard Olympia Chimney cap replacement runs $340-$620 installed; crown repair or coating typically falls between $280-$550, depending on flue count and access. We are not affiliated with or authorized by Olympia Chimney - we are an independent service provider - and we source parts through Haven’s buying network to keep pricing honest.
This page is for Orland Park homeowners who already have an Olympia Chimney cap or crown and need it repaired, replaced, or upgraded. If you are seeing rust streaks on your chimney face, water in your firebox, or a cap that has detached after a storm, we will get a camera down the flue, show you what we found, and give you a written price before any work starts. Call (708) 294-2571 to book. The camera goes in first. The price comes after.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney Gelco series caps: The 3/4-inch mesh on older Gelco single-flue caps tends to clog with cottonwood seed in Orland Park every June, then corrodes from the trapped moisture. We see this on homes near Lake Sedgwick and Centennial Park where the trees are mature. We replace with a same-diameter Gelco cap or a quality aftermarket equivalent with 5/8-inch mesh that sheds debris better, and we document the flue condition underneath with camera footage before we quote.
- Olympia Chimney multi-flue caps (Galvanized and Stainless lines): The corner welds on galvanized multi-flue caps crack after 7-10 years of Orland Park freeze-thaw, especially on chimneys with poor crown drainage. Water gets in, freezes, and pushes the cap skirt outward. We remove the cap, assess the crown for spalling or hairline fractures, repair the crown if needed, then install a stainless multi-flue cap with a drip edge that extends past the crown perimeter.
- Olympia Chimney wind-directional caps: The rotating hood on Olympia’s wind-directional line seizes when the bronze bushing wears, common in homes near the Orland Park Prairie buffer where wind exposure is constant. A seized hood blocks draft and traps moisture. We disassemble the hood, show you the bushing wear on camera, and either rebuild with OEM parts or replace with a fixed-cap design if the flue draft is adequate without rotation.
- Olympia Chimney crown wash failures beneath the cap: Olympia Chimney crowns are poured concrete, but the factory wash coat is thin and often fails at the flue tile interface first. We see this on 2015-2019 builds in Orland Park’s newer subdivisions west of La Grange Road. The cap looks fine, but water is migrating through crown cracks. We remove the cap, grind the crown to sound concrete, apply a flexible crown coat rated for northern Illinois thermal cycling, then reinstall or replace the cap.
- Olympia Chimney outside-mount caps with failed storm collars: The storm collar on outside-mount caps relies on a single bead of sealant that degrades in UV. On south-facing chimneys in Orland Park, we see this fail in 4-6 years, not the 10+ most owners expect. Water runs down the flue exterior and rots the surround. We replace the collar with a two-part seal system and add a diverter flashing if the chimney is on a low-slope roof section.
Our Olympia Chimney Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers 24/7. We ask for your Olympia Chimney model if you know it, but most owners don’t - we identify it on site.
- 2
NFPA 211 Level 2 inspection with camera scan. Corrine Halstead or one of our background-checked, uniformed technicians runs a camera down the flue to document liner condition, smoke chamber integrity, and any water damage pattern that tells us where the cap or crown is failing. You see the footage before we quote.
- 3
Written price and scope. We deliver a written price, written scope, and written warranty before work starts - Haven Standard Clause 1. No exceptions. If you have a competitor’s written estimate, we provide a Free Second Opinion.
- 4
Parts decision: OEM or quality aftermarket. We stock Olympia Chimney-compatible caps and crowns through our Haven buying network, including DuraFlex, HeatShield, and Gelco alternatives when they solve a known failure mode better than OEM. We explain the trade-off and let you choose.
- 5
Repair or replacement with photo documentation. We perform the work, then photograph the completed cap or crown from multiple angles and include the images in your documented record - Haven Standard Clause 4, a practice we have maintained since 2009.
- 6
365-Day Done Right Promise. If it’s not done right, we make it right. The warranty is stamped on every job.
BeforeAfterWhat Olympia Chimney Chimney Cap & Crown Costs in Orland Park
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Single-flue cap replacement (Olympia Chimney compatible) | $340-$480 | Flue diameter, mesh size, stainless vs. galvanized |
| Multi-flue cap replacement | $480-$620 | Crown footprint, number of flues, custom vs. stock fit |
| Crown repair (localized spalling) | $280-$420 | Area of damage, need for bonding agent |
| Crown coating (full resurfacing) | $380-$550 | Crown square footage, number of flue penetrations |
| Cap + crown combined job | $620-$950 | Access difficulty, scaffolding or ladder-only |
These are installed prices in Orland Park, with materials sourced through Haven’s buying network. We do not charge separately for the camera inspection or photo record - both are included as standard under Clause 4 of the Haven Standard. Call (708) 294-2571 for an exact quote; estimates are free.
Why Orland Park Homeowners Call Emberly Chimney Cleaners Orland Park for Olympia Chimney Work
We have inspected and cleaned more than 38,000 chimneys since 2009, and a growing share of our Orland Park calls involve Olympia Chimney products from the 2015-2022 building boom. Corrine Halstead, who grew up in Queens and learned this trade through Queensborough Community College’s vocational programs, has run inspections on the older wood-burning fireplaces near Centennial Park and the newer gas inserts west of La Grange Road. She writes the inspection reports by hand because she does not trust carbon copies to hold the detail.
Our technicians are background-checked, uniformed, and licensed - license information is displayed on every page. You get a text when your tech is en route. We also service DuraFlex, HeatShield, and Gelco systems, so if your Olympia Chimney component interacts with another brand’s liner or surround, we do not need to call in a second contractor. Every job carries the 365-Day Done Right Promise and a documented photo record you can reference for insurance or resale.
FAQs
As an independent Olympia Chimney service provider, we use OEM-compatible or quality aftermarket parts that do not alter the flue system in ways that would affect any remaining manufacturer warranty on the liner or fireplace unit itself. We document our work with photos and written scope so you have a clear record if warranty questions arise later. Call (708) 294-2571 if you want us to review your specific warranty terms before booking.
Most single-flue cap replacements take 60-90 minutes on site; multi-flue caps or jobs requiring crown repair first typically run 2-3 hours. We book by the job, not the hour, so the price does not change if access is trickier than expected. Call (708) 294-2571 to schedule - estimates are free.
We can source direct replacements for most Olympia Chimney cap lines through Haven’s buying network, including discontinued sizes. If your existing cap failed due to a design weakness - like the Gelco mesh clogging pattern we see near Lake Sedgwick - we will show you the aftermarket alternative and explain why it might last longer. The choice is yours, and the price for either option is in writing before work starts.
Water in your firebox, efflorescence (white powder) on the chimney face, or rust stains on the cap itself often mean crown damage beneath. We run the camera first to check for water patterns inside the flue, then inspect the crown surface. If the crown has hairline cracks or minor spalling, we repair it; if the structural concrete is sound and only the cap is leaking, we replace the cap only. You see the evidence before we quote. Call (708) 294-2571 for an exact diagnosis - estimates are free.
Not usually. A failed cap or crown lets water in, which damages the liner over time, but the liner itself is often still serviceable. We camera-scan the full flue length to verify. If the liner is intact, we fix the cap and crown and you are done. If we find cracked flue tiles or deteriorated mortar joints, we show you the footage and quote liner repair separately - no bundled pressure to do everything at once. Call (708) 294-2571 and we will give you the straight answer.
Written by Corrine Halstead, Owner, Emberly Chimney Cleaners Orland Park at Emberly Chimney Cleaners Orland Park, serving Orland Park and nearby areas.